My Account Basket
Got a Question? Call us on -

0141 552 6290

Got a Question? Call us on -

0141 552 6290

Yamaha FG-TA TransAcoustic Vintage Tint

Yamaha FG-TA TransAcoustic Vintage Tint

RRP: £700.00


Yamaha FG-TA TransAcoustic Vintage Tint Front

Estimated Shipping Cost -
Available to order - 3-7 Days


The TransAcoustic system fitted to the Yamaha FG-TA - presented here in a stunning Vintage Tint finish - will change your perception of what an acoustic guitar is capable of. Play it normally, and it just sounds and plays like a very impressive acoustic guitar. Switch the system on, however, and you can dial in a selection of two reverb types or chorus, all without plugging into an amp. This makes it a perfect instrument for at-home enjoyment, while you know that the same sound can also be routed through a PA system for live performance. Experience it today in our Glasgow store, or buy online for a full set-up and speedy delivery to the UK and Europe.

Yamaha FG-TA TransAcoustic Guitar in Vintage Tint


  • An actuator installed on the inner surface of the guitar back vibrates in response to the vibrations of the strings. The vibrations of the actuator are then conveyed to the body of the guitar, and to the air in and around the guitar body, generating authentic reverb and chorus sounds from inside the body.
  • Three simple knobs let you adjust your amount of effects and the line out volume level. By keeping the controls small, it minimizes the area of the holes in the body material, reducing acoustic sound loss.
  • The body is a solid spruce top with mahogany back and sides guitar based on the FG-series. Louder and stronger sound in the low- to mid-ranges, thanks to cutting-edge acoustic analysis technology developed by the Yamaha R&D Division and a newly-designed scalloped bracing pattern.
  • The battery box is now integrated into the end-pin jack. This requires fewer holes in the body and reduces acoustic sound loss. It can also be connected to a PA or amp for use as an acoustic electric guitar.

Product Details

  • Body Shape: Traditional Western
  • Scale Length: 25 9/16 " (650 mm)
  • Body Length: 19 7/8 " (505 mm)
  • Total Length: 40 7/8 " (1038 mm)
  • Body Width: 16 1/4 " (412 mm)
  • Body Depth: 3 15/16 " - 4 5/8 " (100-118 mm)
  • Nut Width: 1 11/16 " (43 mm)
  • String Spacing: 0.43 " (11.0 mm)
  • Top Material: Solid Spruce
  • Back Material: Mahogany
  • Side Material: Mahogany
  • Neck Material: Nato
  • Fingerboard Material: Rosewood
  • Fingerboard Radius: 15 3/4 " (R400 mm)
  • Bridge Material: Rosewood
  • Nut Material: Urea
  • Saddle Material: Urea
  • Bridge Pins: Black ABS with White Dot
  • Tuners: Die-Cast Chrome(TM29T)
  • Body Binding: Cream
  • Soundhole Inlay: Black + White
  • Pickguard: Transparent
  • Body Finish: Gloss
  • Neck Finish: Matte
  • Electronics: SYSTEM70 TransAcoustic + SRT Piezo Pickup
  • Controls: Reverb / Chorus / TA Switch / Line Out Vol
  • Connections: Line Out
  • Strings: Yamaha FS50BT or D'Addario EXP11
  • Accessories: Hex Wrench, 2 x AA Batteries